My cart
No products in your shopping cart
Quality components and materials was chosen for better performance and longer life of our product. The Rool'in concept is patented and protected in France and abroad. The batteries we use are of PANASONIC and SAMSUNG brand, recognized as the most efficient for their quality and technological advance. The used motor (brushless) is more reliable, production is 200,000 units / year. Today we offer a finished product that meets EU legislation on VAE * and complies with the EN15194 standard:
The fact that the VAE * is a bicycle brings advantages:
We conducted tests of battery life with a person of 85/90 kg on country roads and terrain.
We conducted many special tests (2 000) and recorded a satisfaction rate of over 90%. Many women have tried Rool'in with and without electrical assistance, they found the nice bike to use in both cases. They were conquered by the maneuverability of their new VAE, management is totally fluid.
Product: Kit electric wheel: 20 ", 26" and 28 "
Exigences relatives aux essais / Test Requirements |
Test de rotation de la roue / Rotational accuracy test- As per applicant’s request with reference to EN 14764:2005 Clause 4.10.1 |
Essai statique de résistance des matériaux / Static strength test- As per applicant’s request with reference to EN 14764:2005 Clause 4.10.3 |
Test vélo à assistance électrique / EPAC bicycles- As per applicant’s request with reference to EN 15194:2009 |
Directives basse tension / LVD Directives compliance (2006/95/EC)- As per applicant’s request with reference to EN 60950-1:2006 + A11:2009 + A1:2010 +A12:2011 |
Test de compatibilité Electromagnétique / EMC test- As per applicant’s request with reference to EN 62311:2008 |
Test de compatibilité Electromagnétique /EMC test- As per applicant’s request with reference to- EN 301 489-3 V1.4.1- EN 301 489-1 V1.9.2- EN 61000-3-2:2006 + A1:2009 + A2:2011- EN 61000-3-2:2008- EN 55014-1:2006 + A1:2009 + A2:2011- EN 55014-2:1997 + A1:2001 + A2:2008 |
Test de spectre radioélectrique / Radio spectrum test- As per applicant’s request with reference to- EN 300 440-1 V1.6.1- EN 300 440-2 V1.4.1 |
___
Your questions, our answers
I’m asking a question, I make a note
The Rool'in team will personally answer you by email.
If your question is of general interest for other users, it will be published, preserving your anonymity.
ATVs and women bikes receive electric wheel sets 26 inches. City bikes are complemented with 28-inch wheels, folding bikes with 20 inch wheels.
The electric bicycle wheel kit comes fully equipped.
Sports lovers will appreciate the fact that the aid is disengaged.
Rool'in makes your high-tech bike, economic and efficient. Drive becomes a pushover.
We invite you to read 3 measures to respect for a perfect installation:
- The distance down the fork should be 100 mm (you can play up to 8 mm on the distance of the fork with washers)
- And 82 mm to 105 mm from the bottom (you can play up to 8 mm on the distance of the fork with washers)
- The diameter of the fork lug must be 10 mm
And it's very simple:
2) Set the wireless speed sensor on the opposite side of the chain to the pedal crank. Assistance works as soon as you pedal.
3) Establish the connection between the sensor and your mobile device (see manual).
The app has additional features (average speed, mileage on a run, total distance, ...) and will become the indispensable partner of all your walks.
With this wireless system, the detection of your movements is amplified, the electric assistance is instantaneous and fluid.
Check measures at your fork as above in the section Version "SMART".
In addition, the kit comes with 2 mounting options for the pedal sensor or sensor
- The magnetic disc (D) also requires a space of 4 mm to be able to insert between the edge of the bottom bracket and pedal by clipping directly.